|
NOT just another 'natural' soap - they are very different.
Soap comes from a chemical reaction between various oils and fats and caustic soda (lye or NaOH), called saponification. Commercial soap is usually produced from tallow and other fats plus a variety of synthetic compounds which are added to produce the desired lather, texture and hardness of the finished bar. The mixture is boiled at high temperatures with the caustic solution until the process of saponification takes place; soap is the end product. The soap is then grated very finely (milled) and sent through a machine which compacts the soap shreds very tightly to produce a hard, polished bar. However, more additives are needed to give the soap the required amount of plasticity and to prevent the soap from sticking to the rollers of the milling machine.
When fats, oils and lye are mixed, the other product produced besides soap is glycerin. During the manufacture of commercial soaps, glycerin is produced and is either washed away with the other waste products, or it is separated out and sold on to the cosmetics, food or explosives (think nitro-glycerin!) industries. This is an enormous loss - glycerin is a natural moisturiser for the skin, and the removal of glycerin during the commercial production of soap is one of the reasons why commercial soaps can often be so drying to the skin.
In our cold-process soapmaking method the basic mixture of vegetable oils and fats, sodium hydroxide, water, natural nutrients and essential oils is stirred together. No additional heat is supplied apart from the gentle heat needed to melt the oils at the start of the process and the glycerin is stirred back into the soap as the saponification reaction takes place. This means that our handmade soaps retain all the glycerin, making superior and gentle bars of soap.
We use simple, everyday ingredients in our soaps. Depending on the type of soap we want to make, our soaps will contain a mixture of ingredients drawn from the following list: purified water, olive, coconut and palm oils, other fixed oils such as apricot kernel, avocado, jojoba, hemp or sweet almond, nutrients such as shea butter, beeswax and cocoa butter, essential oils for their glorious scents and a range of pigments for colour. Often we add other ingredients, such as powdered flowers or leaves, oatmeal, honey, kaolin or fullers earth.
- We only ever use pure, aromatherapy-grade essential oils so scent the soaps, never man-made scents.
- Essential oils cannot be beaten for their glorious fragrances.
It is the coconut oil in our soaps that produces the luxurious lather. When you're washing, turn the bar a few times in your hands to release the lovely, soft, fluffy bubbles that are the hallmark of coconut oil in a soap - you'll find they are softer and smoother than those of a typical mass-produced soap.
A note about tallow
Although we believe that tallow (beef fat) makes a wonderful, hard, close-lathering bar of soap when used as a proportion of the basic oils and fats, we completely understand that there are many people who do not wish to use animal products on their skin. As a consequence we have taken the decision to stop using tallow in our soaps unless specifically asked otherwise. We don't use other animal products, to the best of our knowledge, except goat's milk and beeswax. Where these are used in our soaps, we give adequate warning of their presence, so that people who choose not to use them can avoid those particular bars.
|
